Washer dryer not heating up on Ariston, Creda, Hotpoint, Indesit, New world and Scholtes washing machines

Here is a step by step guide of the process:

Washer dryer not heating up? Washer dryers that are not heating up on the drying side are a common fault. this video will show you how to find the fault or faults and repair the washing machine this tutorial is good on Ariston, Creda, Hotpoint, Indesit, new world and Scholtes

Front loading combination washer dryers are vent-less and are called condenser dryers The washing machine heats the air via the dryer heater and a fan then forces hot air through the clothing into the outer drum where a condensation process cools the now hot moist air, this condenses the water vapour using a cool water feed to help condense the vapour. The water is then flushed out by the pump through the drain hose to the sink or through the plumbing lines.

These units are easy to install under cabinets, in closets or anywhere with electricity because of their lack of vents and are very common but are not as efficient as the vented dryers and will not normally dry the amount of clothing that you fit into wash. I suggest always drying small amounts as the air flows through the clothing better and dries them faster.

The parts that normally fail most often are in order of failure rate.

Common terms used for this type of problem on Ariston, Creda, Hotpoint, Indesit, New world and Scholtes washing machines are:

Washer dryer not heating up, washing machine not dying the clothes, washer dryer not drying, Hotpoint washer dryer not drying, Ariston washer dryer not drying, washer dryer not drying properly, Indesit washer dryer not drying,

 This repair video is correct for all these models of washer dryer:

ARISTON A1200WD, AI1248MCUK, AI1259MCUK, AL1250CTUK, AL1250CUK, ALD10UK, ALD12SUK, ALD12UK, AMXXF149EU, AMXXF149FR, AMXXL120FR, AMXXL129EU, AV1048CUK, AV1247CUK, AV834CUK, AV838CUK, AWD10UK, AWD1200UK, AWD12SUK, AWD12UK, CD12TUK A1400SWD, CDE129ALL A1400WD, CDE12XUK A1600WD, KCD121BRUK A2090UK, KCD121WHUK AB1030CUK, KCD12TBRUK AB1240CUK, KCD12TUK AB930CUK, KCD12TWHUK, AI1244CUK, SWD1000UK AI1248CUK,CREDA IWD12, HOTPOINT BWD12, WD640G, WD640P, WD640T, WD645A, WD860G, WD860P, WD860T, WD865A, WDD960AUK, WDD960GUK, WDD960PUK, WDF740AUK, WDF740GUK BWD129, WDF760PUK WD420G, WDL520GUK WD420P, WDL520PUK.K WD420T, WDL540GUK WD440G, WDL540PUK.K WD440P, INDESIT WD10UK, WDE12UK, WDG1095GH(G), WDG1095WG, WDG1195WG, WDG1195WG/1, WDG1295WG, WDG985BG, WDG985WG, WDS1000UK, WIDE127UK, WIDL102UK, WIDL126SUK, WIDL126UK WD10UK, WIDL146UK WD11UK, WIDXXL106EU WD12SUK, WIDXXL126EU WD12UK, WIDXXL126SEU WD12XUK, WIDXXL146EU WD14UK, NEW WORLD 016625, HLE19003WH, SG12TXUK, SGE12XUK(NW) HLE19002BR, SCHOLTES KCD12TUK(M), MLS1200, MLS1200-240, MLS1200W, MLS1200W-240, MLS1200X KCD12TUK(W),

Grab the necessary parts and start repairing



2 Responses to “Washer dryer not heating up on Ariston, Creda, Hotpoint, Indesit, New world and Scholtes washing machines”

  1. martinguitarhd28 says : Reply

    fantastic information

  2. SIBUK says : Reply

    I just diagnosed a faulty dryer element using this video and have ordered a
    replacement from your site. There was no bulge or split in the coil but
    there was no continuity so I figure its broke. Lets see if it sorts the
    problem 🙂

Leave a Reply

TOP

Social Widgets powered by AB-WebLog.com.