How to replace a washing machine door seal or gasket on a Balay, Bosch, Neff or Siemens.

Here is a step by step guide of the process:

How to replace a washing machine door seal or gasket on a Balay, Bosch, Neff or Siemens.

  1. Disconnect the power on the Bosch, Neff , Siemens or Balay appliance. Make sure you’re unplugged from the mains before you do any work on an electrical appliance.
  2. Remove the lid on your Bosch, Neff or Siemens washing machine.
  3. Remove the tension ring under the rim of the seal at the front
  4. Flip the whole seal into the drum and undo screws the hold the door interlock in place.
  5. Then take of the front panel as in the video, (Everything may be laid out slightly differently on your make and model but it should give you a good idea of how easy it is to replace a Bosch, Neff or Siemens door seal.) you can also see other videos on different makes.
  6. Remove the counter balance weight; this will make the job a lot easier for you.
  7. Remove the tension ring holding the seal to the outer tub or drum.
  8. Reverse of the process to put your new.

You can find your model number here

Pictures to replace a washing machine door seal


Grab the necessary parts and start repairing



6 Responses to “How to replace a washing machine door seal or gasket on a Balay, Bosch, Neff or Siemens.”

  1. newholborn says : Reply

    Great guide! Thanks, this saved me!

  2. ElectronicDeLuxe says : Reply

    Apart4u – new channel?

  3. GREAT VIDEO THANKS FOR THE HELP

  4. how-2-repair.com says : Reply

    Yes it is I no longer own apart4u so have build a new site to help people find there faults and repair there appliance and show the customers the cheapest places to buy the parts. I was glad we could help. Please remember to mark us down to you favourites and subscribe to our video channel

  5. armuk says : Reply

    good step by step guide.

    thanks.

Leave a Reply

TOP

Social Widgets powered by AB-WebLog.com.