How to replace your washing machine motor on Hotpoint, Creda, Etc early models only

Here is a step by step guide of the process:

How to replace your washing machine motor on Hotpoint, Creda, en EtcThis video will show you how to replace your washing machine motor on Hotpoint, Creda,  Etc early models only this is a step by step procedure on the process,

We will also show you the cheapest places to buy your motors around this page.


Grab the necessary parts and start repairing



6 Responses to “How to replace your washing machine motor on Hotpoint, Creda, Etc early models only”

  1. RapidAssistant says : Reply

    Hotpoints are easy to work on as they are one of the few makes that have the motor mounted on the top of the drum.

  2. how-2-repair.com says : Reply

    if you need help on an appliance,why not send us an Comment on this video and we will try and make a film to help you, paul

  3. paul john horrocks says : Reply

    very informative video i have a hotpoint first edition 100 switch blew in door got new switch but i took controller unit off and need to see where the plugs go

  4. gyunagyos says : Reply

    that was an informative video. I think this is the best on youtube in this theme.thanks

  5. Guds777 says : Reply

    i do owne a washing machine motor whoo
    come from an old electrolux machine.
    the motor is from SOLE 220v 50hz
    600/14000 rpm,, 10 wire connection.
    and i am gonna usit in a another protjeckt.
    and i need to know how to connekt the wire.

  6. aja2460 says : Reply

    On my Creda, there is a white plastic with a cable attached to it, what is it and what does it look like when its reassembled?

Leave a Reply to RapidAssistant

TOP

Social Widgets powered by AB-WebLog.com.