How to replace washing machine motor carbon brushes in a Indesco & welling motors.

Here is a step by step guide of the process:

This video will show you how to replace washing machine motor carbon brushes in a Indesco & welling motors, we are working on a Teka washing machine but this guide is good for most makes that have Indesco or welling motor fitted like: Indesit, Haier, Teka, Samsung

To replace motor carbon brushes on a washing machine might sound scary, but it’s a surprisingly easy to replace.

  1. Remove the lid and the back panel.
  2. Then you need to remove the washing machine belt that is attached to the motor and drum pulley.
  3. You will now need to remove the bolts that attach the motor to the washing machine drum.
  4. You now have to remove the old carbons out of the motor see video for this.

To take out a motor on a washing machine might sound scary, but it’s a surprisingly easy to replace and then fit the carbon brushes.

Common faults that customers complain of on Indesit, Haier, Teka, Samsung are:

My washing machine empty’s but does not spin. My washing machine fills but does not wash. The clothes in my machine are coming out wet. There is still soap powder on the clothes, my washing machine does not spin, etc etc.

 

 


Grab the necessary parts and start repairing



2 Responses to “How to replace washing machine motor carbon brushes in a Indesco & welling motors.”

  1. how-2-repair.com says : Reply
  2. Gary Hiscutt says : Reply

    Hello, i have just got a Haier washing machine, and put some washing in the
    machine, once i had set the program, and the machine had started – but
    within a couple of minutes i had an error message come up (Error 7) this
    happened three times now
    can you help

Leave a Reply

TOP

Social Widgets powered by AB-WebLog.com.