Dishwasher not filling with water or washing correctly. How service the appliance.

Here is a step by step guide of the process:

When your dishwasher doesn’t clean well or fill with water,

why not fix it yourself following these simple steps in the video and avoid the expensive call out charges of an engineer. A simple service of your dishwasher and cleaning of the parts often solves the problem.

Insufficient water in the dishwasher can cause poor cleaning. If the floats get stuck in the raised position or the pressure bowls or pipes get blocked with slim, the dishwasher won’t fill with water. Another likely cause is a clogged inlet screen or faulty inlet valve

Dishwasher not filling with water

1                 Remove the spray arm and clean out the holes using a paper clip as a hook it is the best tool for the job. Spray arms like this one you unscrew a cap on top. Others require you to pull them off.

2                 Remove the filter for cleaning.

Dishwasher pressure bowl3                 You should be able to see the dishwasher main tank pressure bowl this will need to be removed then cleaned see video on this.

4                 The base plate or sometimes known as a kick strip will need to be removed followed by the cover plate behind.

5                 Next you will need to remove the side panel to gain access to the water flow system it is the one on the right on this machine.Dishwasher water system

6                 You will now see the dishwasher filling pressure bowl this will need to be cleaned.

7                 All the pipes that go to the main pressure switch will need to be checked for blockages. By blowing into the pipes you should here the pressure switch click, this tells you that the switch should be working correctly.

8                 Once you have cleaned everything and replaced them try the dishwasher again if it works great you have not need to buy a new valve.

9                 If the dishwasher still does not fill you will have to try replacing the main water valve see other tutorials on this.


Grab the necessary parts and start repairing



7 Responses to “Dishwasher not filling with water or washing correctly. How service the appliance.”

  1. artbeau says : Reply

    Excellent instructions… Thank you!

  2. thu nguyen says : Reply

    amazing !!!!!!!!!!!!!!!!!!!!!!!!! thank you so much!

  3. Mm says : Reply

    Just to thank you! i was able to repair my dishwasher thanks to your video
    🙂

  4. Mm says : Reply

    Hi. I will buy you a beer using paypal. Meanwhile, the dishwasher is
    showing F8 and E01 error again, although it was really late in the cycle
    (before I cleaned, the water didn’t get in anyway). What else can I do? The
    machine works better if I put it away from the wall and the hose is “flat”.
    If I put the machine close to the wall, the erros show up immediately. Ty!

  5. nik2009es says : Reply

    Good video ……

  6. MagnaYu says : Reply

    Too complicated for me to do, but thanks anyway – :).

Leave a Reply

TOP

Social Widgets powered by AB-WebLog.com.