Cooker door glass has come loose on the bracket or hinge. How to repair

Here is a step by step guide of the process:

Cooker door glass has come loose on the bracket or hinge. Fixing metal brackets, hinges and glass on oven doors has now become easy with the aid of high temperature silicone or sometimes called glue. It has excellent adhesion with most plastics, rubber, glass, ceramics and metals.

This video is on Cooker door glass, hinges or brackets that have come unstuck or the glass is falling off. We will show you how to remove the old silicone or glue and refit the hinge or bracket as good as new. With our range of different Oven Door Glue kits and silicones that are all very good for high temperatures.

Very often the oven and cooker door glass is sealed, or glued, into place using high heat resistant glue. This same glue is used in some cases to also fix door hinges to oven doors as well and is a black substance that resembles a sort of silicone sealant. The glue, which we use, is available below this tutorial article. This is especially common on ovens and cookers made by Stoves, Teka, Indesit, Hotpoint, belling etc many of the inner oven door glass panels from them are glued into place.

You may also see oven door hinges or door hinge mounting brackets bonded to a door glass as well. Again, you must allow the time to cure the bonding agent when you replace or refit these or they will fall off. I have learned this the hard way.

Once applied the glue must be allowed to properly set in the case of door glass replacement or indeed oven door hinge replacement for twenty four hours is my rule or the chances are that the repair will fail.

This video tutorial on how to take your door of on most different manufactures of cookers will also help you.


Grab the necessary parts and start repairing



2 Responses to “Cooker door glass has come loose on the bracket or hinge. How to repair”

  1. how-2-repair.com says : Reply
  2. Cindy Hossack says : Reply

    very handy and thank you. I will watch this again while I will be repairing
    it. I will let you know how I got on

Leave a Reply

TOP

Social Widgets powered by AB-WebLog.com.