Whirlpool oven not heating up or tripping the electricity supply?

Here is a step by step guide of the process:

Is Your Whirlpool oven not heating up? This Diagnosis Guide will show you how to check your Whirlpool element and how to replace your Whirlpool cooker element.

Here are the 3 main faults to look for in your oven or cooker that is not heating up or tripping the electricity supply.

  1. Your Whirlpool oven will not work until the clock/timer is set to manual. Consult your Whirlpool manual.
  2. If the fan in the oven is running and the thermostat light is on, this will lead us to believe that the element has gone faulty. With grills the thermostat light should come on there should be heat, if not then this could be the grill element or the thermostat.
  3. When you turn the oven on, the household electrical supply trips on the fuse board or Rcd (this is the earth trip in the fuse board sometimes called the breaker tripping) your fan oven element has gone to earth and needs replacing.

Click Here to Find the element for your Whirlpool cooker or oven
Note: Your oven will not work until the clock/timer has been re-set after replacing an oven element or tripping the electrical supply. Consult your Whirlpool manual.

Common terms used to describe this fault.

Whirlpool Oven not heating up, Whirlpool oven not working, Whirlpool cooker not heating up, Whirlpool cooker not working, why does my Whirlpool oven trips the breaker, Whirlpool oven trips the circuit breaker, Whirlpool oven trips electricity, Whirlpool oven trips power, Whirlpool oven trips fuse, Whirlpool oven trips main fuse, Whirlpool oven trips rcd,

 

 

2 Responses to “Whirlpool oven not heating up or tripping the electricity supply?”

  1. how-2-repair.com says : Reply
  2. Haroon Khan says : Reply

    Just wondering if you can help. I have a Whirlpool AKP 203 I. It heats up
    perfectly, but when it heats to a high temperature, the electricity will
    trip. Upon reseting the fuse box and turning the oven back on, once again
    it will trip the fuse box. I have changed the ring element but I still have
    the same issue. I have been told it could be the thermostat, would you
    agree?

Leave a Reply

TOP

Social Widgets powered by AB-WebLog.com.